$140-200 /Piece/Pieces
| Payment Type: | T/T |
| Incoterm: | FOB |
| Min. Order: | 1 Piece/Pieces |
| Transportation: | Ocean,Land,Air,Express |
| Port: | Guangzhou,Shanghai,Tianjin |
Model No.: Double brace Turbine Group 1 And 2
Brand: Hanfeng
Status: New
Applicable Industry: Hotels, Building Material Shops, Machinery Repair Shops, Manufacturing Plant, Farms, Home Use, Retail, Construction Works, Energy &Amp; Mining, Food &Amp; Beverage Shops, Other
Out-of-warranty Service: Video Technical Support
Where To Provide Local Services (in Which Countries Are There Overseas Service Outlets): None
Showroom Location (in Which Countries Are There Sample Rooms Overseas): None
Marketing Type: New Product 2020
Place Of Origin: China
Service System: Video Technical Support, Online Support
Diameter: 355mm
| Selling Units | : | Piece/Pieces |
| Package Type | : | carton packing |
Double bracing Turbine Group 1 And 2/YUTONG 968 Ouble Brace Turbine Group /SDLG 956 Ouble Brace Turbine Group/SDLG Double Brace Turbine Group
Double bracing Turbine Group 1 And 2 Diameter:355mm,Double braced with 36 blades
Loader Accessories applicable model:L916H L918H L920 L920H LG933 L933 L933H L936 LG50F LG50B LG952 LG953 LG953N L953 L953H L955 L955H L955HL L955F L955FL L955L L956F L956HL L956HEV L956F PLUS L968HEV L965F L965H L968F L968H L972H L975F L975H L989F LFT22F ZL30E ZL50E LFT18F LFT33F
Our company's accessories for the following wheel loader:Liugong、SDLG、XCMG、XGMA、SEM、Lonking、JGM、SANY、Doosan、Yutong、Shantui、Degong、Chenggong、HYUNDAI、ENSIGN、Changlin，etc。
The internal parts of Loader Gearbox are replaced with non-authentic parts, resulting in the damage of other related parts
The service personnel disassembled the transmission Torque Converter Assembly for inspection. The sealing ring of the regulating wheel seat was broken in several sections, and the inner sealing surface of the split gear was seriously worn. The sealing ring and the split gear were replaced. Since the torque converter and transmission has been decomposed, other parts inspection, by the way, found that the input level had slight traces of wear gear rotary oil seal (the part adopts the lip seal, under the condition of the role of pressure oil, oil seal automatic compensation function, input level of gear wear and tear, rare should not affect the normal use), service personnel proposed the damaged need to replace, At that time, there was no input of the first gear in the service station, so accessories were purchased from the market for replacement. At the same time, the rotary oil seal was replaced and the installation was completed for test run. At the beginning, the loader could move forward, but after running for several meters, the loader stopped.
The service personnel checked the variable speed pressure and the variable speed control system and found no abnormality. After the variable speed pump and variable speed valve were tried and changed, the fault was not eliminated. The factory personnel arrived at the scene to confirm the fault phenomenon and maintenance process before and after the maintenance, and the analysis may be related to the parts or assembly replaced during the maintenance. Loader fittings look smart, will double variable assembly to be removed, the rotation torque converter elastic plate activities freely, remove the cover wheel using a wrench after turn the end of the input level gear spline, unable to turn, will be found after separation of torque converter, gearbox, input level gear bearing, enter the secondary gear bearing and the bearing between the two gear because of the high temperature sintering damage and to blue.
Input in the primary gear and replace the original car gear found the input level, change the level of the gear bearing installation location of the seam allowance is 3 mm higher than the original car, the bearing installation does not reach the designated position, when installation should be measured and ensure bearing axial clearance of 0.3 ~ 0.7 mm), three plate bearing sintering, turbine set torque can be outward, The input gear of the original machine was reassembled and the damaged bearing was replaced.
Transmission Assembly includes:Loader Gearbox Housing、Loader torque converter housing、Overrunning clutch、Torque Converter Movement Assembly、Torque Converter Pump、Turbine group 1 and 2、Torque converter guide wheel
Our products are sold to more than 100 countries and regions worldwide
4200471 TORQUE CONVERTER
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now