Loader Brake Pad for Liugong XCMG XGMA SDLG

Loader Brake Pad for Liugong XCMG XGMA SDLG/Liugong Xcmg Loader Brake Pad 35C0401/XGMA SDLG Loader Brake Pad 35C0401/YUTONG SEM LOVOL Loader Brake Pad
Liugong XCMG Loader Brake Pad,Liugong part number：35C0401
The brake of wheel loader is composed of pneumatic brake valve, Air Compressor Booster Pump, brake clamp and brake pad. When the thickness of the brake pad of the loader is less than 2mm (mm), it is necessary to go to the repair shop to replace it immediately.
Brake pad, also called brake pad, in the braking system of vehicles, the brake pad is the most critical safety parts, all the brake effect is basically the brake pad plays a decisive role.
Brake discs are mostly composed of steel plates, bonded insulation layer and friction block, the insulation layer is composed of non-heat transfer materials, the purpose is to heat insulation; The friction block is composed of friction materials and adhesives. When braking, it is squeezed on the Brake Disc and brake drum to cause friction, so it will reach the purpose of the car deceleration and braking.
The brake pad thickness is less than 2mm (mm) needs to be replaced because:
1, because the brake pad is consumable, in use will gradually wear, when wear to the limit position, must be replaced, otherwise it will reduce the braking effect, or even cause safety accidents;
2, under normal driving conditions, every driving 5000 kilometers of brake pads to test, not only to test the remaining thickness, at the same time or to test the wear of brake pads;
3, and the degree of wear on both sides is not similar, return position is not comfortable, etc., found abnormal conditions must be dealt with immediately.
Our company's accessories for the following wheel loader:Liugong、SDLG、XCMG、XGMA、SEM、Lonking、JGM、SANY、Doosan、Yutong、Shantui、Degong、Chenggong、HYUNDAI、ENSIGN、Changlin，etc。

Our products are sold to more than 100 countries and regions worldwide.