Quick installation Tire Protection Chain
Tire protection chain
Tyre protection chains for wheel loaders, models are: 1670-20,1670-24, 17.5-25,20.5-25,23.1-25, 23.5-25,26.5-25, 29.5-25, etc., with chain joints, main chain members connected between chain joints, side chains connected to two side links and butt chain members connected to two end chain joints. The two chain joints are installed on both sides. The utility model relates to a fastening rope with a rope clip at the end. The main chain member is an open type, and the opening is fixed with a reinforcing pin. Because the reinforcing pin and the main chain parts are fastened on both sides, the top beam plays a role, and the chain mouth is not easy to deform. Therefore, the utility model has low damage rate and long service life. The tire protection chain adopts advanced production technology at home and abroad, using high-quality alloy steel materials, precision casting, high-strength automatic flash butt welding, reasonable structure, welding by special welding process, good wear resistance, fatigue resistance, according to the service conditions for 3000-8000 hours of life. Convenient disassembly, time-saving, labor-saving, complete product specifications, supporting with imported loaders, tire protection chain, made of high-tech wear-resistant materials, novel compact structure, stable performance, mainly suitable for mining operation loader, tire wear fast, short service life, tire price is expensive, high cost. The product is tightly wrapped on the tire of the loader, which can effectively protect the tire of the loader from being punctured by sharp stones and prolong the service life. Tire life, using tire protection chain, can save more than ten tires, but also can improve the loader '
Installation method
Tools needed: Hammer, pliers, wire (about 1 meter)
1. Place the loader on a flat place to release about one-third of the tire air.
2. Unroll and lay the chain in front (inside and outside) of the tire to be installed.
3. Remove the accessories (open section and diamond open section) and hang them at one end of the chain with a meter long wire.
4. Turn on the loader and take care that the front of the tire is aligned with the front of the chain.
5. Hang the tire pattern with wire, straighten the chain with a crowbar, and slowly move the vehicle backward until the protective chain is wrapped around the tire (front and back).
6. After the two ends of the chain are aligned, connect the two ends with the connecting section.
7. Connect the tensioning chain on the outside of the tire, tighten and tighten.
8. Check the locking ring of the whole tire protection chain, so that the welding mouth faces outward, so as not to wear the tire.
