Model NO.: HS
Motor Power(kw): 1~10
Installation Slope: Any Angle
Chute size(mm): Pipe Model
Overall Dimension: 3920×1640×1320
Trademark: HYWELL
Transport Package: Wood Box
Specification: 5-7.5kw
Origin: China
HS Code: 8428200000
Function:
HS Series Vacuum Loader - Close Tank Loader is best machine to close send powder and granules, high efficient and fast speed. long distance transfer,it used for powder, small granular and ball materials to transfer into various seal container and mixing equipment such as Hywell mixing machine that include as EYH two dimensional mixer, YYH one dimensional mixing machine, SYH 3-D blender. V type mixing machine.
Description
HS Series Vacuum Loader - Close Tank Loader is a new style feeder developed by our company recently. The negative pressure is formed by blower pump.Its maximum negative pressure may reach to over 40000Pa .The filtration of powder duct can be filtration by new style filter element. The accuracy of filtration may reach to 10μm . Meanwhile the vacuum feeder has set reversed blowing system of compressed air to clean the dust of filter so that make the feeding efficiency higher.
The vacuum conveyor is comprised of vacuum blower, feeding tube, PE filter, vacuum hopper, automatic control device, pneumatic discharging device etc, it need client to supply the compress air (Compress air pressure :0.3-0.4Mpa ).
Features
1. Highly polished inner and outer surfaces of the barrel, no dead comer, easy to discharge materials, easy to clear, no cross contamination.
2. The negative pressure feeding, wear small, high efficiency, low energy consumption
3. Feeding-pipe material: Polyurethane hose , long service life
4. Negative pressure conveying, good sealing, no dust, no leakage
5. Simple structure, easy operation
6. Machine materials : AISISUS304 , AISISUS316L, and other material .
Attention to order
1. When inquiry the HS Series Vacuum Loader , Client need to supply the materials name.
2. When inquiry the HS Series Vacuum Loader , Client need to supply the materials characteristic that include materials HP, Material fluidity and so on.
3. When inquiry the HS Series Vacuum Loader , Client need to supply materials size (mesh)
4. When inquiry the HS Series Vacuum Loader , Client need to supply the conveyor distance and conveyor height.
5. When inquiry the HS Series Vacuum Loader , Client need to decide which kinds steel for machine-304 stainless steel or 316L stainless steel (Hywell also give suggestion for the stainless steel model base the materials HP). | Model | HS-4 | HS-5 | HS-7.5 |
| Motor power | 4 | 5.5 | 7.5 |
| Ability of transport(kg/h) | 800-3000 | 1200-4000 | 1800-6000 |
| Size(L ×W×H) (mm) | 1500×550×1650 | 1500x550x1650 | 1800x650x1800 |
